CE Marking: Which Industrial Products Actually Need It
CE marking is often described as "the European safety mark". More precisely, it is a declaration that a product meets the requirements of the EU directives that apply to it. No directive, no CE.
For industrial components the relevant directives are usually the Machinery Directive (2006/42/EC), the Low Voltage Directive (2014/35/EU), the EMC Directive (2014/30/EU), and the Pressure Equipment Directive (2014/68/EU).
A bearing needs no CE mark. It is a component with no independent function and falls outside these directives. A complete electric motor, on the other hand, falls under Low Voltage and EMC, and does need one. A solenoid valve with a coil falls under Low Voltage; the same valve body without electrical actuation may not.
This is why suppliers sometimes cannot provide a CE certificate for a component you expected to have one — and also why a cheap "CE certificate" for a plain fastener is a red flag rather than a reassurance.
The distinction that trips up buyers is component versus machine. Under the Machinery Directive, a component intended to be incorporated into a machine is generally outside the directive — the machine builder assembles the declaration. But a component with an independent safety function (a safety relay, a light curtain) may need its own assessment.
For a self-declared product, the manufacturer issues a Declaration of Conformity and keeps a technical file. For certain categories, a Notified Body must be involved. Ask which route applies; a supplier who cannot answer this is assembling paperwork they do not understand.
Practical check for a purchase: ask for the Declaration of Conformity, not just a certificate image. The DoC names the directive, the standards applied, the responsible person in the EU, and the product identification. A certificate without a DoC tells you nothing about which directive was assessed.